Stainless steel valves and fittings
We offer stainless steel valves and fittings (material stainless steel AISI 304, AISI 316) mainly for applications in wineries, breweries, food and beverage industry, the dairy industry, the refrigeration industry, water management, chemical industry etc.
We can provide a material certificate EN 10204 3.1 on request.
Stainless steel globe valve 1/2”
Properities: Max. working pressure: 13 bar (200PSI) Type: threaded BSP-G,½“ Material:…
CLAMP 50.5 mm_Threaded Adapter DN15_Outer thread…
Properties: Connection Tri clamp standard: DIN 32676 clamp collar 50.5 mm, outer thread…
Relative pressure transmitter, 1/4" BSP, 24VDC…
A change in the measured pressure will cause the sensor diaphragm to deflect. This change…
Stainless steel pressure gauges - the bottom …
Technical parameters Housing material SS - DIN 1.4301 (AISI 304), mechanism DIN 1.4301 …
Stainless Steel Pressure Gauge, Dial 100 mm,…
The devices in this category must be assembled and filled using components available from…
Gasket Ethylene-Propylene (EPDM) For Butterfly…
Standard: DIN Material: EPDM, black color FDA clearance on request Seal ethylene…
Gasket Silicone (VMQ) For Butterfly Valves CLAMP…
Standard: DIN Material: Silicone (VMQ), blue color FDA clearance on request Seal for…
Stainless Steel Ball Valve, Two-pieced With…
The ball valve: Connection: inner thread BSP-G, 1 Pressure range: max. 69 barů (1000PSI)…
Stainless Steel Needle Valves, Threaded 1/8”
Connection: inner thread BSP-G 1/8" Orifice: 3mm Material: stainless steel 1.4301 (AISI…
Stainless steel manometer with separating…
Technical data of the membrane separator with DIN nut: Separation membrane material:…
Stainless steel manometer with separating…
Technical data of membrane separator with nut: Membrane material: AISI 316L (1.4404),…
Stainless Steel Control Lever For Butterfly Valve…
Stainless Steel Control Lever For Butterfly Valve DN15 - DN40 Material: Stainless Steel…
Clamp Connection Union 11851 Stainless Steel _C-G…
Properties: CLAMP DIN 32676 DN25 (collar 34 mm) Fittings DIN 11850,11851 (Rd44)…
Reduction eccentric, clamp DN25/20
Properties: Standard: DIN 32676 Type: eccentric, clamp Material: stainless steel 1.4301 …
Eccentric reducer, welding, short DN25/20
Standard: DIN11850 Type: Eccentric reducer, welding, short Material: stainless steel 1…
Relative pressure transmitter with separating…
Function: Changing the measured pressure will cause the sensor diaphragm to deflect. This…
Sanitary Diaphragm, CLAMP DIN 32676, collar 50.5…
Technical data of the stainless steel sanitary diaphragm: connection: DIN 32676 CLAMP…
Eccentric reducer, welding, long DN25/20
Standard: DIN11850 Type: Eccentric reducer, welding, long Material: stainless steel 1…
Stainless Steel Pressure Gauge, Dial 63 mm, With…
This type of pressure gauge (manometer) is used to measure the pressure of liquids and…
Spare Gasket (O-ring) For Stainless Steel Check…
Spare Gasket (O-ring) For Stainless Steel Check Valves Welded, CLAMP | DN15/DN20/DN25 The…
Rotameter (flowmeter) Plastic - Glued Joint 0.01…
Material (screws, float, joints): ABS, transparent part ASA Connection: glued joint,…
Union Sight Glass with lighting LED, welded, DN80
Properities: Standard: DIN Connection: welded, DN80 Material: stainless steel 1.4301 …
Digital pressure gauge with bottom (radial)…
Technical parameters of manometer: the power cord and batteries are not included Housing…
Stainless steel Y filter slant with stainless…
Properties: Connection: threaded BSP-G, 3/8" Maximal working pressure: 55 bar (800PSI)…
