Montage and anchor system
Pipe Clamp without Rubber, two screws, stainless steel DIN 1.4301, welding conection
Pipe Clamp with Rubber EPDM, two screws, stainless steel DIN 1.4301, M8
Pipe Clamp with Rubber EPDM, two screw, M8/M10, galvanized
2 Hole Galvanized Pipe Clamp
Installation Pipe Holder
Threaded Rod Stainless Steel AISI304, length 1m
Stainless Steel Mounting Bracket
Galvanized Steel Mounting Bracket
Galvanized Beam Connector (Girder)
Galvanized Mounting Beam Length 3m
Sliding Nuts M8 (with spring)
Base Plate With Nut Galvanized
Pipes, Curves and Couplings for Cable Glands (Non-Threaded)
Anchor Foot Square Galvanized, Saddle Clamp
Installation Pipe Hanger
Accessories For Mounting Beam
Beam clamp
The mounting and anchoring system is used for fixing piping and ventilation ducts or electrical installation routes.
SURFACE TREATMENT: galvanized steel
Square washer galvanized
securing washer of the fastening system for the beam profile 41x41 mm. the shape of the…
Sliding nut M8 galvanized without spring
Sliding nut M8 galvanized without spring 41x25mm
Sliding nut M8 galvanized with spring short…
Sliding nut M8 galvanized with short spring (profile 41x25)
Anchor Foot Square Galvanized, Saddle Holder…
Anchor Foot Square Galvanized, Saddle Holder | 150x150 mm
I-shaped beam coupling galvanized
beam connector galvanized to connect beams in one plane when connecting the beams using…
Sliding nut M8 galvanized with spring long spring…
Sliding nut M8 galvanized with spring | long spring (profile 41x41)
Plastic end cap for beam
Removable, beam end cover, brackets for beam profile 41x41 mm mounting system. It is…
Beam clamp M8
Beam clamp for fixing M8 threaded rod. The screw of the M8 terminal is adjusted in the…
Beam clamp M10
Beam clamp for fixing M10 threaded rod. The screw of the M10 terminal is adjusted in the…
Installation Pipe Holder 1/2"
Properties of an Installation Pipe HolderMounting brackets, clips, clips for…
Pipe Clamp with Rubber EPDM, two screw, M8/M10,…
Pipe Clamp with Rubber EPDM, two-screw, M8/M10, galvanized Characteristic: Material:…
Pipe Clamp with Rubber EPDM, two screw, stainless…
Characteristic: Material: stainless steel DIN 1.4301 Wall thickness: t = 1.5 mm Gasket:…
2 Hole Galvanized Pipe Clamp 1/2”
2 Hole Galvanized Pipe Clamp | 1/2”, clip, installation pipe or cable bracket. Material:…
Pipe Clamp without Rubber, two screws, stainless…
Pipe Clamp without Rubber, two-screws, stainless steel DIN 1.4301 Characteristic: …
