Stainless steel valves and fittings
We offer stainless steel valves and fittings (material stainless steel AISI 304, AISI 316) mainly for applications in wineries, breweries, food and beverage industry, the dairy industry, the refrigeration industry, water management, chemical industry etc.
We can provide a material certificate EN 10204 3.1 on request.
Tubular filter type welded, DN50 (52,0 mm/1,5 mm)…
connection: DIN 11850-1, row 1, DN50 (52,0 mm/1,5 mm) material: stainless steel 1.4301 …
Stainless Steel Sampling Needle Valve, Welded
Technical parameters of sampling needle valve welded: Standard: DIN Connection type:…
Reduction centric, clamp DN25/20
Properties: Standard: DIN32676 Type: centric, clamp 25/20 Material: stainless steel 1…
Stainless steel manometer with separating…
Technical data of the membrane separator with DIN nut: Separation membrane material:…
Transport casters, swivel, stainless steel,…
Technical parameters of transport wheels: Wheel size: diameter 150 mm, thickness 50 mm …
Transport Casters, swivel, stainless steel,…
Technical parameters of transport wheels: Caster size: diameter 75 mm, thickness 31 mm…
Brewery saccharometer 0-10%
Properties of a Brewery saccharometer • Measuring range is 0-10% and 10-20%• Measuring…
Stainless steel ball valve with full bore, two-…
Properties: Control: manual – by lever Connection: inner thread BSP-G 1/4“ Pressure…
Digital pressure gauge with bottom (radial)…
Technical parameters of manometer: the power cord and batteries are not included Housing…
Clamp Connection Union 11851 Stainless Steel _C-G…
Properties: CLAMP DIN 32676 DN25 (collar 34 mm) Fittings DIN 11850,11851 (Rd44)…
Corner wort tube filter connection according to…
OPTIONAL connection: Stainless Steel Welded Union According to the Standard DIN11851…
Liner Hose Fitting DIN 11851 DN20 (OD 22 mm)
The union nut is not included in the attachment and must be ordered separately: Převlečná…
All-stainless steel bimetal thermometer with…
The thermometer is made of stainless steel 1.4301 (AISI 304), equipped with a hermetic…
Tubular filter type C-C, DN65 (collar 91mm),…
connection: DIN 32676 CLAMP collar 91 mm (K91) material: stainless steel 1.4301 (AISI 304…
Control lever for butterfly valves DN15 - DN40, 2…
material: stainless steel AISI 304 damper shaft: 8x8 mm 2 lever positions relative to the…
Filtration slotted sieve 0,1 mm for filter DN65
Material: stainless steel 1.4301 (AISI 304) Working pressure: 0–10 bar Working…
Stainless Steel Welded UNION SMS DN25
Properties of a Union: Stainless steel food fitting consists of nut, liner, male and a…
Rotameter (flowmeter) Plastic - Glued Joint 0.01…
Material (screws, float, joints): ABS, transparent part ASA Connection: glued joint,…
Stainless steel Y filter slant with stainless…
Properties: Connection: threaded BSP-G, 3/8" Maximal working pressure: 55 bar (800PSI)…
Fixed Cleaning Ball, Threaded 1/4”
Properties: Type: threaded BSP G 1/4" Pressure: 1.5 to 2.5 bar Maximal surrounding…
Carbonization element for the beverage industry G…
Description: Generally, carbonization element is used for the saturation of the finished…
Relative pressure transmitter with separating…
Function: Changing the measured pressure will cause the sensor diaphragm to deflect. This…
Stainless Steel Pressure Gauge, Dial 100 mm,…
The devices in this category must be assembled and filled using components available from…
Stainless steel manometer with separating…
Technical data of the membrane separator with DIN nut: Separation membrane material:…
